目录1. 介绍2. 准备工作2.1. License2.2. Platform2.3. Common Images2.4. 测试环境3. aie_adder介绍3.1. 文件列表3.2. aie_adder.cc3.3. aie_graph.cpp3.4. aie_graph.h3.5. aie_kernel.h3.6. host.cpp3.7. pl_mm2s.cpp3.8. pl_s2mm.cpp4. 经验4.1. DEVICE和EDGE_COMMON_SW4.2. ES Device4.3. iostream4.4. Source file does not exist: adder.xclbin4.5. SD Card cannot boot
1. 介绍
最近陆陆续续有工程师拿到了VCK190单板。 VCK190集成了Xilinx的7nm AIE，有很强的处理能力。 本文介绍怎么运行Xilinx AIE的例程，熟悉AIE开发流程。
前一篇文章，Versal AIE 上手尝鲜 — Standalone例程介绍了进行Standalone（BareMetal）程序开发的例子。
这一篇文章，在Xilinx提供的Linux平台基础上，介绍怎么进行Linux程序开发，使用了Vitis_Accel_Examples中的aie_adder作为例子。
2. 准备工作
2.1. License
在上手之前，需要注意是VCK190 Production单板，还是VCK190 ES单板。如果是VCK190 Production单板，使用VCK190 Voucher，在Xilinx网站，可以申请到License。安装License后，License的状态窗口下，能看到下列项目。
AIEBuild
AIESim
MEBuild
MESim
如果是VCK190 ES单板，需要在Lounge里申请”Versal Tools Early Eacess”; “Versal Tools PDI Early Eacess”的License，并在Vivado里使能ES器件。在Vivado/2020.2/scripts/init.tcl的文件里，添加“enable_beta_device xcvc*”，可以自动使能ES器件。
2.2. Platform
在进行开发之前，需要准备Platform。 VCK190 Production单板和VCK190 ES单板使用的Platform不一样，可以从下面链接下载各自的Platform，再复制到目录“Xilinx/Vitis/2020.2/platforms/”下。
VCK190 Production Platform
VCK190 ES Platform
准备好后，目录结构与下面类似。
2.3. Common Images
Xilinx现在还提供了Common Images，包含对应单板的Linux启动文件，和编译器、sysroots（头文件、应用程序库）等。可以在Xilinx Download下载Versal common image。
2.4. 测试环境
Host OS： Ubuntu 18.04
Vitis 2020.2
PetaLinux 2020.2
VCK190 Production
3. aie_adder介绍
AIE的aie_adder，相当于C语言的helloword例子，它创建了AIE Kernel、用于为AIE Kernel搬移数据的PL Kernel，并以仿真方式、或者硬件方式运行。
3.1. 文件列表
aie_adder有下列文件。 稍后也对主要文件，进行简要介绍。
aie_adder:
│ description.json
│ details.rst
│ Makefile
│ qor.json
│ README.rst
│ system.cfg
│ utils.mk
│ xrt.ini
│
├─data
│ golden.txt
│ input0.txt
│ input1.txt
│
└─src
aie_adder.cc
aie_graph.cpp
aie_graph.h
aie_kernel.h
host.cpp
pl_mm2s.cpp
pl_s2mm.cpp
3.2. aie_adder.cc
aie_adder.cc是定义AIE Kernel的文件，也是最重要的文件，仿真和实际运行都需要。
AIE Kernel也很简单，相当于是C语言编程的HelloWorld, 只是读取2个向量，做加法运算后，再写出去。
void aie_adderinput_stream_int32* in0, input_stream_int32* in1, output_stream_int32* out) {
v4int32 a = readincr_v4in0);
v4int32 b = readincr_v4in1);
v4int32 c = operator+a, b);
writeincr_v4out, c);
}
3.3. aie_graph.cpp
aie_graph.cpp定义和控制运算的graph，这个例子中，只用于仿真。
PLIO* in0 = new PLIO"DataIn0", adf::plio_32_bits, "data/input0.txt");
PLIO* in1 = new PLIO"DataIn1", adf::plio_32_bits, "data/input1.txt");
PLIO* out = new PLIO"DataOut", adf::plio_32_bits, "data/output.txt");
// Hank： only for simulation??
simulation::platform<2, 1> platformin0, in1, out);
simpleGraph addergraph;
connect<> net0platform.src[0], addergraph.in0);
connect<> net1platform.src[1], addergraph.in1);
connect<> net2addergraph.out, platform.sink[0]);
# 2. ifdef __AIESIM__
int mainint argc, char** argv) {
addergraph.init);
addergraph.run4);
addergraph.end);
return 0;
}
# 3. endif
3.4. aie_graph.h
aie_graph.h定义了运算的graph，连接了stream数据流和AIE kernel，仿真和实际运行都需要。
using namespace adf;
class simpleGraph : public graph {
private:
kernel adder;
public:
port<input> in0, in1;
port<output> out;
simpleGraph) {
adder = kernel::createaie_adder);
connect<stream>in0, adder.in[0]);
connect<stream>in1, adder.in[1]);
connect<stream>adder.out[0], out);
sourceadder) = "aie_adder.cc";
runtime<ratio>adder) = 0.1;
};
};
3.5. aie_kernel.h
aie_kernel.h最简单，只声明了aie_adder的原型，仿真和实际运行都需要。
void aie_adderinput_stream_int32* in0, input_stream_int32* in1, output_stream_int32* out);
3.6. host.cpp
host.cpp会申请内存，加载数据, 加载xclbin, 运行AIE Kernel。
simpleGraph addergraph;
static std::vector<char> load_xclbinxrtDeviceHandle device, const std::string& fnm) {
// load bit stream
std::ifstream streamfnm);
stream.seekg0, stream.end);
size_t size = stream.tellg);
stream.seekg0, stream.beg);
std::vector<char> headersize);
stream.readheader.data), size);
auto top = reinterpret_cast<const axlf*>header.data));
xrtDeviceLoadXclbindevice, top);
return header;
}
int mainint argc, char** argv) {
// Open xclbin
auto dhdl = xrtDeviceOpen0); // Open Device the local device
auto xclbin = load_xclbindhdl, "krnl_adder.xclbin");
auto top = reinterpret_cast<const axlf*>xclbin.data));
adf::registerXRTdhdl, top->m_header.uuid);
int DataInput0[sizeIn], DataInput1[sizeIn];
for int i = 0; i < sizeIn; i++) {
DataInput0[i] = rand) % 100;
DataInput1[i] = rand) % 100;
}
// input memory
// Allocating the input size of sizeIn to MM2S
// This is using low-level XRT call xclAllocBO to allocate the memory
xrtBufferHandle in_bohdl0 = xrtBOAllocdhdl, sizeIn * sizeofint), 0, 0);
auto in_bomapped0 = reinterpret_cast<uint32_t*>xrtBOMapin_bohdl0));
memcpyin_bomapped0, DataInput0, sizeIn * sizeofint));
printf"Input memory virtual addr 0x%px
", in_bomapped0);
xrtBufferHandle in_bohdl1 = xrtBOAllocdhdl, sizeIn * sizeofint), 0, 0);
auto in_bomapped1 = reinterpret_cast<uint32_t*>xrtBOMapin_bohdl1));
memcpyin_bomapped1, DataInput1, sizeIn * sizeofint));
printf"Input memory virtual addr 0x%px
", in_bomapped1);
// output memory
// Allocating the output size of sizeOut to S2MM
// This is using low-level XRT call xclAllocBO to allocate the memory
xrtBufferHandle out_bohdl = xrtBOAllocdhdl, sizeOut * sizeofint), 0, 0);
auto out_bomapped = reinterpret_cast<uint32_t*>xrtBOMapout_bohdl));
memsetout_bomapped, 0xABCDEF00, sizeOut * sizeofint));
printf"Output memory virtual addr 0x%px
", out_bomapped);
// mm2s ip
// Using the xrtPLKernelOpen function to manually control the PL Kernel
// that is outside of the AI Engine graph
xrtKernelHandle mm2s_khdl1 = xrtPLKernelOpendhdl, top->m_header.uuid, "pl_mm2s:{pl_mm2s_1}");
// Need to provide the kernel handle, and the argument order of the kernel arguments
// Here the in_bohdl is the input buffer, the nullptr is the streaming interface and must be null,
// lastly, the size of the data. This info can be found in the kernel definition.
xrtRunHandle mm2s_rhdl1 = xrtKernelRunmm2s_khdl1, in_bohdl0, nullptr, sizeIn);
printf"run pl_mm2s_1
");
xrtKernelHandle mm2s_khdl2 = xrtPLKernelOpendhdl, top->m_header.uuid, "pl_mm2s:{pl_mm2s_2}");
xrtRunHandle mm2s_rhdl2 = xrtKernelRunmm2s_khdl2, in_bohdl1, nullptr, sizeIn);
printf"run pl_mm2s_2
");
// s2mm ip
// Using the xrtPLKernelOpen function to manually control the PL Kernel
// that is outside of the AI Engine graph
xrtKernelHandle s2mm_khdl = xrtPLKernelOpendhdl, top->m_header.uuid, "pl_s2mm");
// Need to provide the kernel handle, and the argument order of the kernel arguments
// Here the out_bohdl is the output buffer, the nullptr is the streaming interface and must be null,
// lastly, the size of the data. This info can be found in the kernel definition.
xrtRunHandle s2mm_rhdl = xrtKernelRuns2mm_khdl, out_bohdl, nullptr, sizeOut);
printf"run pl_s2mm
");
// graph execution for AIE
printf"graph init. This does nothing because CDO in boot PDI already configures AIE.
");
addergraph.init);
printf"graph run
");
addergraph.runN_ITER);
addergraph.end);
printf"graph end
");
// wait for mm2s done
auto state = xrtRunWaitmm2s_rhdl1);
std::cout << "mm2s_1 completed with status" << state << ")
";
xrtRunClosemm2s_rhdl1);
xrtKernelClosemm2s_khdl1);
state = xrtRunWaitmm2s_rhdl2);
std::cout << "mm2s_2 completed with status" << state << ")
";
xrtRunClosemm2s_rhdl2);
xrtKernelClosemm2s_khdl2);
// wait for s2mm done
state = xrtRunWaits2mm_rhdl);
std::cout << "s2mm completed with status" << state << ")
";
xrtRunCloses2mm_rhdl);
xrtKernelCloses2mm_khdl);
// Comparing the execution data to the golden data
// clean up XRT
std::cout << "Releasing remaining XRT objects...
";
xrtBOFreein_bohdl0);
xrtBOFreein_bohdl1);
xrtBOFreeout_bohdl);
xrtDeviceClosedhdl);
return errorCount;
}
3.7. pl_mm2s.cpp
pl_mm2s.cpp是利用HLS做的PL设计，用于从内存搬移数据到AIE Kernel。
void pl_mm2sap_int<32>* mem, hls::stream<qdma_axis<32, 0, 0, 0> >& s, int size) {
data_mover:
for int i = 0; i < size; i++) {
qdma_axis<32, 0, 0, 0> x;
x.data = mem[i];
x.keep_all);
s.writex);
}
}
3.8. pl_s2mm.cpp
pl_mm2s.cpp也是利用HLS做的PL设计，用于从AIE Kernel搬移数据到内存。
void pl_s2mmap_int<32>* mem, hls::stream<qdma_axis<32, 0, 0, 0> >& s, int size) {
data_mover:
for int i = 0; i < size; i++) {
qdma_axis<32, 0, 0, 0> x = s.read);
mem[i] = x.data;
}
}
4. 经验
aie_adder 基本可以顺利完成。 在实验过程中，可能遇到下列问题。
4.1. DEVICE和EDGE_COMMON_SW
aie_adder 的说明中，没有提到编译命令。 Makefile中提供了多个命令，基本模式如下：
make all TARGET=<sw_emu/hw_emu/hw> DEVICE=<FPGA platform> HOST_ARCH=<aarch32/aarch64/x86> EDGE_COMMON_SW=<rootfs and kernel image path
检查Makefile，发现下列语句。
ifneq $findstring vck190, $DEVICE)), vck190)
$warning [WARNING]: This example has not been tested for $DEVICE). It may or may not work.)
endif
于是指定DEVICE为vck190。
对于EDGE_COMMON_SW，在Xilinx下载网站找到了common image，包含rootfs 和 Linux kernel image。于是下载Versal common image，再在编译命令里指定解压后的目录“/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2”。
总的编译命令如下。
make sd_card TARGET=hw DEVICE=vck190 HOST_ARCH=aarch64 EDGE_COMMON_SW=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2
编译后，报告找不到对应的platform（平台）。
Running Dispatch Server on port:41287
INFO: [v++ 60-1548] Creating build summary session with primary output /proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/pl_s2mm.xo.compile_summary, at Tue Jun 29 16:36:21 2021
INFO: [v++ 60-1316] Initiating connection to rulecheck server, at Tue Jun 29 16:36:21 2021
Running Rule Check Server on port:39067
INFO: [v++ 60-1315] Creating rulecheck session with output '/proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/_x/reports/pl_s2mm/v++_compile_pl_s2mm_guidance.html', at Tue Jun 29 16:36:22 2021
ERROR: [v++ 60-1258] No valid platform was found that matches 'vck190'. Please make sure that the platform is specified correctly, and the platform has the right version number. The platform repo paths are:
/opt/Xilinx/Vitis/2020.2/platforms
The valid platforms found from the above repo paths are:
/opt/Xilinx/Vitis/2020.2/platforms/xilinx_vck190_base_202020_1/xilinx_vck190_base_202020_1.xpfm
/opt/Xilinx/Vitis/2020.2/platforms/xilinx_vck190_es1_base_202020_1/xilinx_vck190_es1_base_202020_1.xpfm
根据提示，把device换成xilinx_vck190_es1_base_202110_1，使用下列命令编译，同样的问题消失。新的编译命令如下。
make sd_card TARGET=hw DEVICE=xilinx_vck190_es1_base_202110_1 HOST_ARCH=aarch64 EDGE_COMMON_SW=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2
4.2. ES Device
如果没有使能ES Device，会得到错误“ERROR: [HLS 200-1023] Part ‘xcvc1902-vsva2197-2MP-e-S-es1’ is not installed.”。 需要在Vivado里使能ES器件。
===>The following messages were generated while performing high-level synthesis for kernel: pl_s2mm Log file: /proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/_x/pl_s2mm/pl_s2mm/vitis_hls.log :
ERROR: [v++ 200-1023] Part 'xcvc1902-vsva2197-2MP-e-S-es1' is not installed.
ERROR: [v++ 60-300] Failed to build kernelip) pl_s2mm, see log for details: /proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/_x/pl_s2mm/pl_s2mm/vitis_hls.log
ERROR: [v++ 60-773] In '/proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/_x/pl_s2mm/pl_s2mm/vitis_hls.log', caught Tcl error: ERROR: [HLS 200-1023] Part 'xcvc1902-vsva2197-2MP-e-S-es1' is not installed.
ERROR: [v++ 60-599] Kernel compilation failed to complete
ERROR: [v++ 60-592] Failed to finish compilation
INFO: [v++ 60-1653] Closing dispatch client.
Makefile:144: recipe for target 'pl_s2mm.xo' failed
make: *** [pl_s2mm.xo] Error 1
4.3. iostream
编译时，得到错误“fatal error: iostream: No such file or directory”。
INFO: [v++ 60-791] Total elapsed time: 0h 0m 57s
INFO: [v++ 60-1653] Closing dispatch client.
/opt/Xilinx/Vitis/2020.2/gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-g++ -Wall -c -std=c++14 -Wno-int-to-pointer-cast --sysroot=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux -I/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux/usr/include/xrt -I/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux/usr/include -I./ -I/opt/Xilinx/Vitis/2020.2/aietools/include -I/opt/Xilinx/Vitis/2020.2/include -o aie_control_xrt.o ./Work/ps/c_rts/aie_control_xrt.cpp
./Work/ps/c_rts/aie_control_xrt.cpp:1:10: fatal error: iostream: No such file or directory
1 | #include <iostream>
| ^~~~~~~~~~
compilation terminated.
Makefile:170: recipe for target 'host' failed
make: *** [host] Error 1
交叉编译时，引用的头文件一般在sysroots里。
Versal common image解压后，有文件sdk.sh。执行sdk.sh，能得到sysroots。
于是在Versal的sysroots里查找iostream，果然有文件iostream。
hankf@XSZGS4:/opt/Xilinx/peta/2020.2.sdk/sysroots$ ls -l -h
total 8.0K
drwxr-xr-x 17 hankf hankf 4.0K Jun 30 14:32 aarch64-xilinx-linux
drwxr-xr-x 8 hankf hankf 4.0K Jun 30 14:33 x86_64-petalinux-linux
hankf@XSZGS4:/opt/Xilinx/peta/2020.2.sdk/sysroots$ find -name iostream
./aarch64-xilinx-linux/usr/include/c++/9.2.0/iostream
./x86_64-petalinux-linux/usr/include/c++/9.2.0/iostream
hankf@XSZGS4:/opt/Xilinx/peta/2020.2.sdk/sysroots$
根据编译命令中的选项，“–sysroot=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux”，想到要把sysroots放在目录/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2里。于是在目录/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2里为sysroots创建链接，从而使目录/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2里有了sysroots。
hankf@XSZGS4:/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2$ ln -s /opt/Xilinx/peta/2020.2.sdk/sysroots/ ./sysroots
hankf@XSZGS4:/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2$ ls -l -h
total 3.1G
-rw-r--r-- 1 hankf hankf 657K Nov 19 2020 bl31.elf
-rw-r--r-- 1 hankf hankf 2.0K Nov 19 2020 boot.scr
-rw-r--r-- 1 hankf hankf 17M Nov 19 2020 Image
-rw-r--r-- 1 hankf hankf 1.6K Nov 19 2020 README.txt
-rw-r--r-- 1 hankf hankf 2.3G Nov 19 2020 rootfs.ext4
-rw-r--r-- 1 hankf hankf 44K Nov 19 2020 rootfs.manifest
-rw-r--r-- 1 hankf hankf 221M Nov 19 2020 rootfs.tar.gz
-rwxr-xr-x 1 hankf hankf 666M Nov 19 2020 sdk.sh
lrwxrwxrwx 1 hankf hankf 37 Jun 30 14:45 sysroots -> /opt/Xilinx/peta/2020.2.sdk/sysroots/
-rw-r--r-- 1 hankf hankf 946K Nov 19 2020 u-boot.elf
hankf@XSZGS4:/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2$ ls -l ./sysroots/aarch64-xilinx-linux/
total 60
drwxr-xr-x 3 hankf hankf 4096 Jun 30 14:32 bin
drwxr-xr-x 3 hankf hankf 4096 Jun 30 14:32 boot
drwxr-xr-x 2 hankf hankf 4096 Jun 30 14:32 dev
drwxr-xr-x 41 hankf hankf 4096 Jun 30 14:32 etc
drwxr-xr-x 3 hankf hankf 4096 Jun 30 14:32 home
drwxr-xr-x 8 hankf hankf 4096 Jun 30 14:32 lib
drwxr-xr-x 2 hankf hankf 4096 Jun 30 14:32 media
drwxr-xr-x 2 hankf hankf 4096 Jun 30 14:32 mnt
dr-xr-xr-x 2 hankf hankf 4096 Jun 30 14:32 proc
drwxr-xr-x 2 hankf hankf 4096 Jun 30 14:32 run
drwxr-xr-x 3 hankf hankf 4096 Jun 30 14:32 sbin
dr-xr-xr-x 2 hankf hankf 4096 Jun 30 14:32 sys
drwxrwxr-x 2 hankf hankf 4096 Jun 30 14:32 tmp
drwxr-xr-x 10 hankf hankf 4096 Jun 30 14:32 usr
drwxr-xr-x 9 hankf hankf 4096 Jun 30 14:32 var
4.4. Source file does not exist: adder.xclbin
aie_adder 的Makefile中提供了多个命令。考虑到VCK190使用SD（TF）卡启动，于是使用了目标为sd_card的下列命令编译。但是编译后，遇到了错误“Source file does not exist: adder.xclbin”。
/opt/Xilinx/Vitis/2020.2/gnu/aarch64/lin/aarch64-linux/bin/aarch64-linux-gnu-g++ *.o -lxaiengine -ladf_api_xrt -lxrt_core -lxrt_coreutil -L/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux/usr/lib --sysroot=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/sysroots/aarch64-xilinx-linux -L/opt/Xilinx/Vitis/2020.2/aietools/lib/aarch64.o -o ./aie_adder
COMPLETE: Host application created.
rm -rf run_app.sh
v++ -p -t hw
--platform xilinx_vck190_es1_base_202020_1
--package.out_dir ./package.hw
--package.rootfs /opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/rootfs.ext4
--package.image_format=ext4
--package.boot_mode=sd
--package.kernel_image=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2/Image
--package.defer_aie_run
--package.sd_file ./run_app.sh
--package.sd_file aie_adder adder.xclbin libadf.a -o krnl_adder.xclbin
Option Map File Used: '/opt/Xilinx/Vitis/2020.2/data/vitis/vpp/optMap.xml'
****** v++ v2020.2 64-bit)
**** SW Build by xbuild) on 2020-11-18-05:13:29
** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.
ERROR: [v++ 60-602] Source file does not exist: /proj/hankf/vck190/Vitis_Accel_Examples-master-2021-0625/aie_kernels/aie_adder/adder.xclbin
INFO: [v++ 60-1662] Stopping dispatch session having empty uuid.
INFO: [v++ 60-1653] Closing dispatch client.
Makefile:192: recipe for target 'sd_card' failed
make: *** [sd_card] Error 1
后来尝试命令“all”，能编译成功。
make all TARGET=hw DEVICE=vck190 HOST_ARCH=aarch64 EDGE_COMMON_SW=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2
4.5. SD Card cannot boot
使用编译好的文件，复制到TF卡，启动vck190单板，发现单板不能启动。
检查发现，手上的单板是production芯片，换用xilinx_vck190_base_202020_1，编译出来的文件能够启动。
最后成功编译，而且产生的映像能在vck190 production单板正常启动的编译命令如下：
make all TARGET=hw DEVICE=xilinx_vck190_base_202020_1 HOST_ARCH=aarch64 EDGE_COMMON_SW=/opt/Xilinx/download/2020/xilinx-versal-common-v2020.2